By default, network traffic from a job instance (egress) is not allowed because job instances are containers that run in isolation. Network egress on a job or capsule is closed by default. To open egress for a job, the job must be bound to a service that allows it.
network service type provides direct access, irrespective of protocol, to the network outside the cluster.
Configuring network services
Apcera provides the
network service type for direct access, irrespective of protocol, to the network outside the cluster. Unlike the
http service type, the
network service type does not restrict the protocol to HTTP.
Apcera provides several built-in network service implementations to which you can easily connect jobs. You can also create your own network service type.
network service type does not provide a semantic pipeline.
Binding to an outside network
Apcera provides the following pre-built services for the
network type that let you bind to an outside network for job egress:
||Allows connections to IP address outside Apcera.|
||Allows UDP port 53 connections to your DNS server.|
||Allows HTTP connectivity to any address outside Apcera.|
||Allows HTTPS connectivity to any address outside Apcera.|
||Allows Internet Control Message Protocol (ICMP) to all outside networks.|
||Allows TCP port 53 connections to your DNS server.|
For example, the following command binds a job to the
apc service bind /apcera::outside -job my-capsule
Note that the
/apcera::outside-http network service is not the same as the
/apcera::http service type. Refer to the HTTP service type for more information.
Using the allow egress shortcut
As described above, the service
/apcera::outside is a system-provided
network service that uses the
network service gateway to connect to the external network.
Instead of formally binding a job to the outside network, you can instead use the
--allow-egress flag (or
-ae shortcut), for example:
apc capsule create my-capsule --allow-egress
--allow-egress option is a shortcut for the
service bind /apcera::outside command that binds resulting jobs to the
-ae) flag is available for the following commands:
apc app create
apc capsule create
apc gateway from package
apc stager from file
apc stager from package
You can use
--allow-egress flag for any supported job type that needs network access. For example:
apc stager from package my-package my-stager -ae
-aeflag is a developer convenince. It should not be used for production apps. When you snapshot a capsule,
Creating network services
The APC command to create service of type
network accepts additional options on the command line (following the double-dash (
--)) and passes them to the network service gateway, which sets up restrictions on the created services.
You can create a service of type
network using the following syntax:
apc service create <service-name> --type network -- <options>
Note that the syntax requires a double-dash
--to separate the
apc service createcommand from the
networkservice type options.
network service type supports the following command options. You must specify a value for only one of the
--domainname options, which are mutually exclusive.
||String||IP network in CIDR mask format (IP address v4 and v6), for example:
||String||IP networks in CIDR mask format (IP address v4 and v6), for example:
||String||Fully Qualified Domain Name (FQDN) that is resolved to an IP address using a Domain Name Service (DNS) lookup.|
||String||Allowed protocol; supported values include:
||String||Allowed ports; supported values include a single port (such as
For example, you could create a network service named
marketing-net-service that jobs can bind to using the
apc service create marketing-net-service --type network -- --ipnet 127.0.0.0/24 --protocol tcp --portrange all
This example allows egress connectivity using the TCP protocol to all ports of the subnet 127.0.0.0 using a network mask of 255.255.255.0 (because of the
/24) for all ports.
Or, to support muliple IP addresses, you can use the
--ipnets flag with comma-separated values.
apc service create marketing-net-service --type network -- --ipnets 22.214.171.124/32,126.96.36.199/32 --protocol tcp --portrange all
Or, if an internet domain name (
--domainname) is used and bound to a job, network egress is allowed to the resolved IP address:
apc service create marketing-net-service --type network –- --domainname www.google.com --protocol tcp --portrange all
If you need to create a network service that supports multiple distinct ports, you can create multiple
networkservices and bind the job to each. For example, if you have a job that needs TCP access on any network for both port 80 and port 443, you would create two network services then bind the job to each network service.